Product Categories
Business Community
I connected the EAP110-Outdoor to the home internet (router). EAP110-Outdoor is located on the outside of the house and provides internet in the yard. At 30m there is a house where we want to install
By DrMile · Latest post 8 hours ago
0Helpful
9Views
0Replies
I'm using gateway ER8411 v1.0 (firmware 1.3.1) on software controller v5.15.20.20. I have three separated VLANs: VLAN1: home devices (192.168.1.0/24) VLAN2: shared devices (e.g. printers) (192.168.2.0
mDNSVLAN & Multi-Networks
By shrodi · Latest post 4 hours ago by Clive_A
0Helpful
41Views
3Replies
Hi I m new here, I bought the OC200 and everything works just fine. Now our business developed its own CRM and we want to integrate APIs. but we are struggling. The OC200 is connected to the cloud and
API
By TheNewKid · Latest post 13 hours ago
0Helpful
10Views
0Replies
Good day. Is it planned to be possible to operate EAP650/653/660HD/670/673 points on the channels of UNII-3: 149-161? Currently, only the ranges of UNII-1, UNII-2, UNII-2e are available: 36-140, no ma
By KSab · Latest post 13 hours ago
0Helpful
11Views
0Replies
My access point will not accept this firmware. After extracting the bin file from the zip file and uploading the firmware bin file I get an error, "Failed to check for new update" which is not a helpf
By forcedfx · Latest post 13 hours ago
0Helpful
17Views
0Replies
Hello all After the latest updates of controller,gateway and WiFi our internet connections are dropping out. All WiFi and wired devices are experiencing the same. We can see that we are connected (wif
Network Connectivity
By ProSumerTester · Latest post 38 minutes ago by Vincent-TP
0Helpful
30Views
1Replies
Hi, I installed the release candidate firmware 1.2.0 Build 20250428 Rel.76691 on my system and noticed the mDNS to reflect bonjour traffic across multiple VLANs no longer worked. Thinking it was me I
VLAN & Multi-NetworksACLmDNS
By Pjerrez · Latest post 5 hours ago by Clive_A
0Helpful
37Views
1Replies
Hello, I have just purchased FESTA FR205 because specification supported OPENVPN. But, I did not found any Menu or documentation on OPENVPN. Did I miss something ? Thanks for you help. Pakal98
OpenVPN
By pakal98 · Latest post 4 hours ago by Clive_A
0Helpful
14Views
1Replies
I created a VLAN (WLAN) between TL-SG108PE and TL-SG1016PE and connect SG108PE port 8 to SG1016PE port 16. On the SG108PE, I created the following - VLAN ->802.1Q VLAN -> 802.1Q VLAN Configuration ->
VLAN & Multi-NetworksConfiguration
By BrianQ81 · Latest post an hour ago by BrianQ81
0Helpful
39Views
5Replies
Why I don't have option for this I don't see any of those option to enable deep packet inspection
By john50au · Latest post an hour ago by MR.S
0Helpful
157Views
17Replies
123...
123...